Hi All,
I'm looking for a DDNS package that I can setup on a CentOS 5 server for potentially thousands of devices deployed at thousands of sites world wide. I have had a quick look at Bind9, which I think may buckle under this load if deployed by itself. I have also looked gnudip, but would like some feedback on how easy it is to setup and maintain, also any other packages people have used.
TIA,
Chris
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
----- Original Message -----
From: "Trent W. Buck" <trentbuck(a)gmail.com>
Sent: Mon, 21/11/2011 11:37
To: "Christopher M. Bailey" <chris(a)chrisbailey.au.com>
Cc: luv-main(a)luv.asn.au
Subject: Re: [luv-main] DDNS Server [Scanned]
Christopher M. Bailey wrote:
> Hi All,
>
> I'm looking for a DDNS package that I can setup on a CentOS 5 server for potentially
>thousands of devices deployed at thousands of sites world wide. I have had a quick look at >Bind9, which I think may buckle under this load if deployed by itself. I have also looked >gnudip, but would like some feedback on how easy it is to setup and maintain, also any other >packages people have used.
>
>Normally dynamic DNS works something like this:
>
> curl http://dyndns.org/update.cgi -F domain=foo.example.net -F password=UNPRINTABLE -F >address=1.2.3.4
>
>Since you're talking about bind as a solution, I guess you're
>basically talking about implementing an alternative to dyndns.org
>(i.e. the hub) rather than a dyndns client (i.e. the spokes) ?
>
>In that case, why are you talking about bind? You're not thinking of
>clients pushing updates to the hub via NOTIFY + IXFR, are you?
>Because I don't see how that could possibly work.
>
>
This is exactly what I'm trying to do and why I asked the question here. If Bind is not the right tool, what then is?
TIA, again
Chris
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Ballarat, 19 November 2011
With nine Miniconferences accepted, and three keynote speakers already
announced, preparations are in full swing for linux.conf.au 2012, to be
held in Ballarat, Victoria 16-20th January.
Conference Director Josh Stewart was particularly pleased at progress to
date.
"We've got some huge names lined up to keynote, including Karen Sandler,
Executive Director of the Gnome Foundation, Bruce Perens - the creator
of the Open Source Definition, and the community's own favourite Mad
Scientist Paul Fenwick. We still have one keynote up our sleeve, but
it's a very closely guarded secret!".
The conference schedule boasts a number of perennial favourites,
including Jon Oxer, Andrew Tridgell of Samba, Valerie Aurora and Mary
Gardiner of The Ada Initiative, Bdale Garbee and Jonathan Corbet. A
number of new speakers are also on board for the first time, including
software freedom advocate Ben Sturmfels. The number of accepted talks by
female presenters was the highest on record, at just shy of 25%,
speaking volumes about the ever-increasing diversity of the Linux and
free and open source software community.
Registrations for the conference are filling up fast.
Early Bird registration for the conference sold out just before the
early bird close of end of October. Stewart was enthusiastic at the
response.
"There was of course the usual rush just before Early Bird closed, and
the whole team was sitting there with anticipation watching as we sold
out! It's a great indication of the interest in the conference."
For those interested in the conference, but for whom professional
registration is out of reach, there are a number of alternative options,
including Hobbyist and Student registration. Volunteer nominations are
also welcome. Volunteers are given a free ticket to the conference in
exchange for four days' volunteer work undertaking tasks such as audio
visual, ushering and administration duties.
* Registration pricing options: http://linux.conf.au/register/prices
* Volunteer nomination: http://linux.conf.au/register/volunteer
linux.conf.au will be held 16th-20th January 2012 in Ballarat, Victoria,
Australia. http://lcaunderthestars.org.au and @linuxconfau on Twitter
and Identica. Registrations are now open and a tentative schedule is at:
http://linux.conf.au/programme/schedule
<http://linux.conf.au/programme/schedule%22>
Media enquiries are warmly welcomed to media(a)lcaunderthestars.org.au
I'm testing zentyal in a xen VM (HVM) and everything I open on the
console just crashes (opens/closes repeatedly). Apparently this is a
known but with zentyal (openbox) but I don't really want a console X
session anyway. Is there any easy way to turn it off? I think Ubuntu
does things a little bit different to the debian that I'm used to.
Thanks
James
Hi,
I will see you tommorow at the November Beginner's workshop @ The Hub
@ Docklands, cnr Bourke St and Harbour Esplanade, Docklands @ 12.00PM
(http://luv.asn.au/2011/11/19).
I will be driving Sheila's Ford Falcon.[1]
Sheila can't come because she has to work tomorrow.
Thanks.
Best regards,
James
ph 0412 319669
FOOTNOTES
1. The Falcon is overdue for a service so I would prefer not to drive
and get a lift from somene going past Frankston, but if I do have to
drive I will be able to offer lifts to others.
What is the newsreader equivalent of mutt?
Rationale:
I use NNTP for gwene, gmane and asr.
I'm sick of Gnus.
I'm not sick of NNTP -- (esp. not interested in RSS clients).
Years ago, happily migrated mail from gnus to mutt.
So, something like mutt for NNTP is what I want.
PS: I notice mutt's debian/patches/ contains some NNTP patches that
just need rebasing, maybe that's less icky than learning foorn...
In light of the recent bind9 zero-day, I logged into my secondary ns to
make sure there was nothing slipping passed the monitoring. There is no
evidence of trouble, but I can see a heap of these messages:
Nov 17 05:34:19 ns2 named[1088]: client 111.252.1.88#55544: query
(cache) 'cluster8a.us.messagelabs.com/A/IN' denied
Nov 17 05:35:21 ns2 named[1088]: client 95.89.214.87#3311: query (cache)
'cluster8a.us.messagelabs.com/A/IN' denied
Nov 17 05:35:23 ns2 named[1088]: client 95.89.214.87#3345: query (cache)
'cluster8.us.messagelabs.com/A/IN' denied
Nov 17 05:35:57 ns2 named[1088]: client 79.167.143.122#1148: query
(cache) 'cluster8.us.messagelabs.com/A/IN' denied
Nov 17 05:35:59 ns2 named[1088]: client 79.167.143.122#1175: query
(cache) 'cluster8a.us.messagelabs.com/A/IN' denied
Nov 17 05:37:13 ns2 named[1088]: client 190.213.41.176#2408: query
(cache) 'cluster8.us.messagelabs.com/A/IN' denied
Nov 17 05:37:15 ns2 named[1088]: client 190.213.41.176#2569: query
(cache) 'cluster8a.us.messagelabs.com/A/IN' denied
None of those IP addresses are ours, or our customers, but at least one
zone on this server has MX records that point to the messagelabs.com
addresses. Could I have configured something wrong that might be causing
those IP addresses to try and resolve the messagelabs.com names via my
server? Or could they be running a buggy resolver?
Thanks
James
On Wed, Nov 16, 2011 at 13:01, Trent W. Buck <trentbuck(a)gmail.com> wrote:
> PS: your stupid MUA appears to be replacing every SECOND space in
> multi-space sequences to a non-breaking space, which is fucking
> stupid. You're (implicitly) using format=fixed (ref. RFC2646), so the
> shitty workarounds to get preformatted text in format=flowed are
> neither necessary nor desirable. Rant, rage, grumble, bitch, moan.
Hmm, I'm using the gmail web interface. Do you see the same problem
with email sent by other people using the gmail web interface?
(wondering if it's a setting or lab setting I can play with).
Marcus.
--
Marcus Furlong
On 16 November 2011 13:01, Trent W. Buck <trentbuck(a)gmail.com> wrote:
> PS: your stupid MUA appears to be replacing every SECOND space in
> multi-space sequences to a non-breaking space, which is fucking
> stupid. You're (implicitly) using format=fixed (ref. RFC2646), so the
> shitty workarounds to get preformatted text in format=flowed are
> neither necessary nor desirable. Rant, rage, grumble, bitch, moan.
Why is this a problem?
This line has extra spaces in it to see if I can
reproduce this issue myself, or if it just happens inside quotes.
(also sent from gmail)
--
Brian May <brian(a)microcomaustralia.com.au>
Hi folks,
I've got a couple of machines I want to give away and I'm hoping
to do that with a PXE'd Debian install done using its OEM mode
(in other words it'll ask them some questions from the recipient
on first boot to set up their account).
However, everything I can find about oem mode (which isn't a lot)
talks about using the preseed file and as there's just 2 of these
I was rather hoping that it would be a boot option to make it use
OEM mode. If I do need to use OEM mode I've no idea how I'd do
that with a PXE netboot'ed install..
Ideas ?
cheers!
Chris
--
Chris Samuel : http://www.csamuel.org/ : Melbourne, VIC
This email may come with a PGP signature as a file. Do not panic.
For more info see: http://en.wikipedia.org/wiki/OpenPGP