Jaycar sell a large range of compatible components and the bigger stores trade on Sunday. Check their website catalogue to see if they carry your part. Edward On 05/05/2012, at 23:54, Russell Coker <russell@coker.com.au> wrote:

A project I'm working on needs the below part tomorrow. Do you know of a shop in or near Melbourne that would sell one on a Sunday?

Thanks.

Replacement: DEV-10009. The new version does not have the 6-pin header. This page is for reference only.

Description: This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.

The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is DTR. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.

-- My Main Blog http://etbe.coker.com.au/ My Documents Blog http://doc.coker.com.au/ _______________________________________________ luv-main mailing list luv-main@luv.asn.au http://lists.luv.asn.au/listinfo/luv-main