On 10/05/14 14:07, Robert Brown wrote:
On 10/05/14 09:49, Robert Brown wrote:
On 10/05/14 08:44, Robert Brown wrote:
On 10/05/14 08:11, Robert Brown wrote:
Try extending the EXTRA_CFLAGS in the Makefile thus:
... -I$(SOURCEDIR)/$(INCLUDE_EXTRA_DVB) \ -I/home/debian/linux-sunxi-pat-3.4.67/drivers/media/dvb/dvb-usb/
I.e. The "\" extends from the pre-existing last line, adding one new.
Now it has somewhere to find dvb-usb.h, and anything could happen after that.
Erik
The result is in the attached compile2.txt and have also attached dvb_frontend.h A bit of searching on the error led me to: https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0...
which suggests this: https://github.com/tmair/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0...
which I am about to d/l and try. Beats me why all of my previous searches for "rtl2832 and kernel 3.4" have not taken me to this possibly vital link.
Rob
Ok this compile works without errors. Yay (have you any idea how long I have been at this?) and creates a dvb-usb-rtl2832u.ko but not a rtl2832u.ko despite there being a bunch of files like rtl2832u.c and rtl2832u.o and dmesg complains of no frontend: dvb-usb: found a 'RTL2832U DVB-T USB DEVICE' in warm state. [ 2040.777066] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 2040.793621] DVB: registering new adapter (RTL2832U DVB-T USB DEVICE) [ 2040.833115] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s) [ 2041.153012] RTL2832U check_tuner_type : ERROR Unknown tuner on board...
[ 2041.166512] dvb-usb: no frontend was attached by 'RTL2832U DVB-T USB DEVICE'
[ 2041.190209] input: IR-receiver inside an USB DVB receiver as /devices/platform/sw-ehci.1/usb2/2-1/input/input3 [ 2041.226625] dvb-usb: schedule remote query interval to 287 msecs. [ 2041.251663] dvb-usb: RTL2832U DVB-T USB DEVICE successfully initialized and connected. [ 2041.267826] usbcore: registered new interface driver dvb_usb_rtl2832u [ 2548.427451] rtl2832: disagrees about version of symbol module_layout
so I will attach -v in the Makefile and run it again. Getting there!
So the make is running: CC [M] /home/debian/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0/rtl2832u.o
without errors and similar so should produce a rtl2832u.ko IMHO. It says : ignoring nonexistent directory "/drivers/media/dvb/frontends/" and 3 others like it but those directories exist e.g. ~/linux-sunxi-pat-3.4.67/drivers/media/dvb/frontends so it must be looking in a different place. Not sure if that's why I don't get a rtl2832u.ko but I notice that the install part of the makefile doesn't seem to expect such a .ko file. Maybe I could try mkdir /drivers/media/dvb/frontends/ in directory DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0 from where I run make?
The attached Makefile seems to suggest that only one module is created dvb_usb_rtl2832u.ko which it does successfully but I reckon I need at least one other module rtl2838u.ko which would be the frontend that's missing. Any thoughts anyone?