25 May
2015
25 May
'15
1:15 a.m.
Russell Coker <russell@coker.com.au> writes:
[ 477.971449] ata1.00: status: { DRDY }
IME this means either the disk or the controller is dying. Isolate the fault using SMART self-tests & juggling hardware to see which component the problem stays with. Then replace it. PS: on Transcend MTS400 with link_power_management_policy = min_power, it's because the firmware is bugged. There's no upgrade because the vendor's an uncaring asshat. YMMV.