Hi Is anyone able to offer helpful tips or new directions with this: I am wanting to use a usb device with ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T on a MK802II mini pc using the Allwinner A10 cpu. This device requires modules rtl2830.ko, rtl2832.ko and dvb_usb_rtl28xxu. The second of these modules does not seem to exist without patches on kernel 3.4 but on a raspberry pi I have been successful using kernel 3.10.25+. Here is the relevant lsmod from the pi: r820t 16279 1 rtl2832 8020 1 dvb_usb_rtl28xxu 14333 1 dvb_usb_v2 14860 1 dvb_usb_rtl28xxu rc_core 16313 3 dvb_usb_rtl28xxu,dvb_usb_v2 rtl2830 7378 1 dvb_usb_rtl28xxu dvb_core 92797 3 rtl2830,rtl2832,dvb_usb_v2 However when I try to compile a kernel for the A10 with 3.10.25+ I have no success. If I use the raspi sources for the cross-compile: https://github.com/raspberrypi/linux/archive/rpi-3.10.y.tar.gz I get errors that seem unresolvable: e.g.: undefined reference to `v6wbi_flush_kern_tlb_range' If I use the sunxi kernel source: https://github.com/linux-sunxi/linux-sunxi/tree/reference-3.10 the compile completes without error and I get modules and a uImage file but the device won't boot I am using this as a guide: http://jas-hacks.blogspot.com.au/2012/10/hackberry-a10-compiling-kernel-armh... I have tried using various .config files as a starting point including the pi and from the earlier 3.4 kernel without success Does anyone have any experience in this area? Any help would be much appreciated. Thanks Rob